Welcome to Protech Systems

CMB-220LF

Core express Micro-ATX carrier board

Features

  • Micro-ATX form factor 244mm x 244mm
  • Core express design guide
  • A full complement of I/O interfaces
  • Debugging tools
  • Peripheral devices
Systems
CPU Support
From Core express CPU module
CPU Frequency
From Core express CPU module
Chipset
From Core express CPU module
DRAM
From Core express CPU module
BIOS
From Core express CPU module
Power Supply
Supports ATX / AT; DC 12V only
Dimensions
244 x 244 mm (Micro-ATX)
Certifications
FCC / CE
I/O Ports
SATA Interface
2 x SATA II
Expansion Bus
3 x PCIe (x1)
Use PCIe (x16) slot on carrier board
Serial Ports
4 x COM
Supports RS-232 with D-sub 9
CAN Bus
1 x CAN bus(D-sub9)
MMC/SD
Supports 1 x SD slot onboard
LAN
Single port :
LAN1: 88E1111 with RJ45 (Giga LAN)
Supports wake-on-LAN with ATX power
USB
7 x USB 2.0
Supports USB 2.0 (client x1 with Type B , host x6 with Type A)
4 ports stack connector (Type A) on edge
2 ports stack connector (Type A) with RJ-45 on edge
1 port with vertical connector (Type B)
GPIO
2 in/2 out
Audio
High definition audio; Realtek ALC888S
Supports Line-in, Line-out, Mic with audio connector
Environment
Operating Temp.
0° ~ 60° C ( 32° ~ 140° F ) (fanless solution)
Storage Temp.
- 40° ~ 85° C ( - 40° ~ 185° F )
Humidity
Operation humidity 20 ~ 90%, storage humidity 20 ~ 95%
Graphics
DVI
Built in CPU module
1 x DVI-D
1 x DVI-I

License Agreement

The terms of the software license agreement included with any software you download will control your use of the software.

PROTECH SOFTWARE LICENSE AGREEMENT
IMPORTANT – PLEASE READ THIS CAREFULLY. BY COPYING, INSTALLING OR USING ALL OR ANY PORTION OF THIS SOFTWARE, YOU ACCEPT ALL TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THESE TERMS, YOU ARE NOT ENTITLED TO USE THE SOFTWARE.

SITE LICENSE. You may copy the Software onto your organization's computers for your organization's use, and you may make a reasonable number of back-up copies of the Software for security purposes, subject to these conditions:

1. The Software is licensed for use only in conjunction with Protech component products. Use of the Software in conjunction with non- Protech component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not use the Software to develop other software.

5. You may not sub-license or permit simultaneous use of the Software by more than one user.

6. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Protech or its suppliers. The Software is copyrighted and licensed to you by Protech and relevant third parties.

7. Protech may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly set forth herein, Protech grants no express or implied right to you under any of Protech’s patents, copyrights, trademarks, or other intellectual property rights.

Welcome to Protech Systems Protech Systems Co., Ltd.

In order to optimize our website for you and to be able to continuously improve it, we use cookies. By continuing to use the website, you agree to the use of cookies. More information on cookies can be found in our privacy policy